OnlineCatalog

NOVA Low NOx Burners Print

 

Flexibility of choice in NOx reduction techniques is the key to successful emissions control. Combustion chamber geometry and construction, as well as heat release levels are among the more important determining factors in the choice of low NOx application equipment. Heat exchanger designs vary significantly, and the choice of the most appropriate NOx reduction method is an essential element in meeting current and future emissions standards. The Power Flame NOVA concept provides U.L. listed, factory tested packages capable of using a wide range of NOx reduction techniques. Power Flame engineering will tailor a low emissions burner system to your specific job requirements to provide optimum choice of the most cost effective protocols for your application. Years of dependable performance from hundreds of NOVA system applications have produced NOx reductions in excess of 60% on gas and 40% on oil. The NOVA concept gives you the power of choice. The NOVA concept employs a modular approach for each NOx reduction technique. All Power Flame burners can be field retrofitted by adding the appropriate low NOx module kit to the existing system.For more information,  Click Here. Ultra Low NOx

Bulletin \ Specifications

LNICM




NPMSideView
Power Flame's NOVA Premix™ Burner The NOVA Premix™ Gas Burner employs a fully premixed, high swirl stabilized combustion technology to provide proven low NOx solutions - Sub 30 PPM - without the use FGR for commercial, industrial and process applications. Sub 20 PPM operation, at slightly higher excess levels, can be achieved on many applications. Premixing fuel and air assures complete combustion with minimal levels of CO and unburned hydrocarbons. The unique stainless steel high swirl diffuser guarantees reliable and consistent performance at the operating conditions necessary to provide low NOx emissions.

The NOVA Premix™ is a simple, cost effective, field proven system designed to meet today’s most stringent emission requirements. Power Flame provides a U.L. Listed, factory tested package tailored to your job specific requirements. The NOVA Premix™ is suitable for use on all types of boiler and other heat exchanger applications. It will operate with uniform heat flux and excellent flame stability over a broad range of operating conditions.  For more information,  Click Here.

Bulletin \ Specifications

NPM



Power Flame's NOVA Plus™ Burner Power Flame's NOVA PLUS™ Ultra Low NOx gas burner achieves Sub 9 to12 PPM NOx emission levels on a wide range of commercial, industrial and process applications. The burner relies on a patented, fully premixed surface stabilized combustion technology to minimize NOx emissions and assure complete combustion with minimal CO emissions. The Nova Plus™ achieves these performance levels without the use flue gas re-circulation. The Nova Plus™ is offered for firing rates between 2,000 and 64,000 MBTU/HR. Custom designs up to 125,000 MBTU/HR are available.

The NOVA Plus is a field proven system (with over 100 operating installations) designed to meet today’s most stringent emission requirements. Power Flame provides a U.L. Listed, factory tested package tailored to your job specific requirements. The NOVA Plus™ is suitable for use on all types of boiler and other heat exchanger applications. It will operate with uniform heat flux and excellent flame stability over a broad range of operating conditions.  For more information, Click Here.
NovePlusSideView

Bulletin \ Specifications

NVC



NovaPlus2

Power Flame's NP2 Burner Power Flame's NOVA NP2 Ultra Low NOx gas burner achieves Sub 9 to 20 PPM NOx emission levels on a wide range of commercial, industrial and process applications. The burner relies on a patented, fully premixed surface stabilized combustion technology to minimize NOx emissions and assure complete combustion with minimal CO emissions. The NP2 achieves these performance levels without the use flue gas re-circulation. The NP2 is offered for firing rates between 700 and 6,100 MBTU/HR.

The NP2 incorporates on ratio gas control valve and variable frequency drive combustion air fan as standard and is designed to meet today’s most stringent emission requirements. Power Flame provides a U.L. Listed, factory tested package tailored to your job specific requirements. The NP2 is suitable for use on all types of boiler and other heat exchanger applications. It will operate with uniform heat flux and excellent flame stability over a broad range of operating conditions.  For more information, Click Here.

Bulletin \ Specifications

NP2

 
RocketTheme Joomla Templates